Preparatory Measures; Setting The Language, Date And; Installing The Docking Station - Viking MI 422.1 Gebrauchsanleitung

● Programming the robotic mower
● Completing initial installation
The installation assistant must be worked
through in its entirety. Only then is the
robotic mower ready for operation.
The installation assistant is re-
activated following a reset (reset to
factory defaults). (

Preparatory measures:

● Mow the lawn using a conventional
lawn mower prior to initial installation
(ideal grass height of 3 to 4 cm).
● In the case of a hard and dry surface,
water the mowing area lightly in order to
make it easier to drive in the fixing pins.
● MI 422 PC:
The robotic mower must be activated by
a VIKING specialist dealer and
assigned to the owner's e-mail address.
( 10.)
When navigating through the
menus, follow the instructions in the
"Operating instructions" section.
( 11.1)
You can select options, menu items
and buttons using the control pad.
You can open submenus and
confirm selections using the
OK button.
Use the Back button to
leave the active menu or
jump one step back in the
installation assistant.
If errors or faults occur during the
initial installation, a corresponding
message appears on the display.
( 24.)
108
9.7 Setting the language, date and time
● Pressing any button on the display
activates the machine and thus the
installation assistant.
11.17)
Select the required display language
and confirm with the OK button.
Confirm your language selection
with the OK button or select
"Change" and repeat the language
selection.
● If necessary, enter the 9-digit serial
number of the robotic mower. This
number is printed on the identification
plate (see Machine overview). (
Set the current date using the
control pad and confirm with the OK
button.
Set the current time using the
control pad and confirm with the OK
button.

9.8 Installing the docking station

Read the "Notes on the docking
station" section (
the installation examples (
this instruction manual.
3.1)
9.1) and study
27.) in
0478 131 9935 C - EN