G) Inversion Of The Swivel Direction; H) Reset; Loading Factory Settings; J) Inversion Of The Display Alignment - Renkforce GM107 Bedienungsanleitung

g) Inversion of the Swivel Direction

• Select rtLt in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The swivel direction is not inverted.
YES The swivel direction is inverted.
• Press the ENTER button (4) to confirm your input.

h) Reset

In case of function interferences, you may need to restart the moving head. For this, perform the following
steps.
• Select rSEt in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The RESET process is not performed.
YES The RESET process is performed.
• The internal controller restarts the moving head after the option YES is selected.
i) Loading Factory Settings
After comprehensive changes to the configuration, it may be necessary to reset the device to factory
settings. For this, perform the following steps.
• Select LoAd in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The factory settings are not loaded.
YES The factory settings are loaded.
• The internal controller restores the factory settings after the option YES is selected.

j) Inversion of the Display Alignment

• Select dISP in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The display alignment is not inverted.
YES The display alignment is inverted.
• Press the ENTER button (4) to confirm your input.
33