Control Elements; Can Bus Interface - Waeco MagicSpeed CBI 100 Montage- Und Bedienungsanleitung

_IA_Can Interface.book Seite 10 Dienstag, 26. Januar 2010 8:16 20

Control elements

4 Control elements
See fig. 3
No. Designation
1 Status LED
2 12-pin socket
3 USB socket
4 Vehicle version list
5

CAN bus interface

See fig. 4
No. Designation
1 Brown/black cable: "Handbrake applied" signal
2 Brown/white cable: "Clutch pedal applied" signal
3 White cable: "Reverse gear engaged" signal
4 Orange cable: "Ignition switched on" signal
5 White/black cable: Speedometer signal
6 Yellow cable: Tachometer signal
7 Black/blue cable: "Headlights switched on" signal
8 Green/red cable: Connection to CAN High
9 Green/black cable: Connection to CAN Low
10 Black/red cable: Programming cable
11 Black cable: Connection to earth
12 Violet cable: Connection to continuous positive (+12 V), protected by a safety fuse
(1 A)
10
MagicSpeed CBI 100