Control Elements; Can Bus Interface - Waeco MagicSpeed CBI 150 Montage- Und Bedienungsanleitung

_IA_Can Interface.book Seite 10 Freitag, 26. November 2010 3:25 15

Control elements

4 Control elements
See fig. 3
No. Designation
1 Status LED
2 10-pin socket
3 Software version for the module
5

CAN bus interface

See fig. 4
No. Designation
1 Pink cable: "Handbrake applied" signal
2 Brown cable: "Reverse gear engaged" signal
3 Violet cable: "Ignition switched on" signal
4 Green cable: Speedometer signal
5 Yellow cable: Engine speed signal
6 Orange cable: "Clutch applied" signal
7 White cable: Connection to CAN High
8 Blue cable: Connection to CAN Low
9 Black cable: Connection to earth
10 Red cable: Connection to a cable which is protected with max. 5 A
10
MagicSpeed CBI 150