Safety Instructions - Eneo VMC-5.6/1-LCD Montage- Und Betriebsanleitung

1. Safety Instructions

• Read these safety instructions and the operation manual first before you connect and power to the unit.
• Keep the operation manual at a safe place for later reference.
• Never cover the ventilation slots to avoid overheating.
• If the monitor is brought to a warm room from a cold place allow it to warm up before you power it on.
• Protect unit and cables from entry of moisture and humidity. Never power the unit up if humidity entered but have it
checked at a qualified service station.
• Operate the unit only at a temperature range of –5°C to +50°C (+60°C) and a humidity of max. 90%.
• Never place the monitor in direct sunlight or close to a window. Humidity and direct sunlight can cause substantial
damage.
• Never insert metallic or other parts into the ventilation slots. This could cause permanent damage to the unit.
• Never apply pressure to the LCD screen. This could cause permanent damage to the display.
• Always disconnect the unit from mains if it has to cleaned or is not used for a longer time.
• Make sure that the connection cables are not stressed, bent or damaged during the installation.
• The unit may only be opened by authorized personnel.
• Use only original accessories and spareparts.
10