Engine Oil Changing; Blade Changing; Storing; Disposal - Zipper ZI-BRM52EST Betriebsanleitung

15.3 Engine oil changing

Change the oil according the maintenance plan:
 Loosen the oil drain screw and collect the engine oil in a suitable container
and dispose it properly.
 Fill in engine oil (15W40). (See capture: Fill in engine oil)

15.4 Blade changing

Always wear protective gloves while working on the cutting tool!
 Loosen the blade bolt by turning it counterclockwise
 Remove the blade bolt, spacer, blade insulator and blade
 Replace the blade insulator and spacer, then thread the
blade bolt on the shaft and tighten

15.5 Storing

If the machine is stored for longer than 30 days:
 Let the machine cool down
 Clean the machine and dry
 Empty Tank and carburetor completely, avoid fuel
spillage
 Store in a dry, out of reach of children place, well
packaged

15.6 Disposal

Do not dispose the machine, machine components fuel and oil in residual waste. Contact
your local authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to exchange your old.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BRM52EST
N O T I C E
MAINTENANCE
35