15.2
Changing the thread
15.3
Cleaning
Clean the machine from mud and grass after every operation:
Protect non coated metal parts against corrosion (e.g. with oil or WD40)!
15.4
Storage
•
Remove and clean thread head and cutter blade
•
Fit the blade guard
•
Clean the machine and dry
•
Empty Tank completely, avoid fuel spillage
•
Store in a dry, out of reach of children place, well packaged (protection against cuts)
15.5
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-MOS145Gi 44
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
N O T I C E
MAINTENANCE
44