Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Start and pause play-
back
Direct selection
of a track
Stop playback
Skip to the following
track
Skip to playback the
previous track
Vincent
36
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s)
Description
This button, both on the front of the device and on the remote control, starts
playing the inserted CD and the symbol "
(8)(22)
during play. If there is no CD inserted, "NO DISC" appears in the display
PLAY/
and pressing the button has no effect. If the button is pressed again while a
PAUSE
CD is playing, play will be interrupted at the current position. This "PAUSE"
mode is indicated in the display by the symbol " ". During the pause the
disc continues to rotate and when the button is pressed play continues from
this position. The "PAUSE" function should only be used for brief interruptions.
You can start playing a track at any time by keying in the track number on
the remote control. For numbers over 10, you must press the "10+" button as
often as necessary until it shows the relevant first figure of the number and
Number
keys (18)
then you key in the second figure. If there is no track of the keyed-in number
on the CD, the player switches to "STOP" mode. If the player is paused, you
cannot select any other track directly with the number buttons.
While a CD is being played, pressing this button stops the playing. If the
(9)(24)
player was in "PAUSE" mode, this mode will also be ended by pressing the
STOP
"STOP" button. The total number of tracks on the CD and the total playing
time appear in the display (1) again. This button is on both the front of the
device and the remote control.
When this button is pressed while the CD is playing, the current track stops
playing and the next track in the sequence begins to play. If this button is
(7)(31)
pressed in "STOP" mode, you can choose all the CD tracks one after the
NEXT
other starting from track 02. Playback can then be started again with the
"PLAY/PAUSE" button (8)(22), with the "STOP" button (9)(24) the player
goes back to "STOP" mode. This button is located both on the front of the
device and on the remote control.
If this button is pressed once while the CD is playing, the current track stops
and the actual track starts playing from the start again. Further presses skip
to playing the previous tracks in their playing sequence. If this button is
pressed in the "STOP" mode, you can choose all the CD tracks in reverse
(6)(30)
BACK
order starting with the last track. Playback can then be started again with
the "PLAY/PAUSE" button (8)(22). With the "STOP" button (9)(24) the
player goes back to "STOP" mode. The button is located both on the front
of the device and on the remote control.
" appears on the display (1)
Werbung
Inhaltsverzeichnis
