Geberit AquaClean Sela Inbetriebnahme Seite 7

Tests after installation
Switching on the Geberit
AquaClean Sela
Prerequisites
Geberit AquaClean Sela is installed and connected.
1
If there is no direct mains connection,
connect the mains plug.
2
Using a screwdriver, open the cover on the
right-hand side.
1
2
B1127-001 © 09-2013
966.494.00.0 (00)
3
Switch on the power switch.
Result
The LED on the control panel flashes blue
three times. After this, the LED is lit for
10 min after the last user detection.
Testing the functions
1
Fit the spray shield.
2
4
3
EN
1
7