Herunterladen Inhalt Inhalt Diese Seite drucken

Switching The Appliance On Or Off; Emptying The Pulp Container During Use; Easing Congestions Of The Grater During Use - Rommelsbacher ES 800/E Bedienungsanleitung

Edelstahl entsafter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Switching the appliance on or off

Attention hazard of injury: Do not grasp in the fi lling hole and the grater! The grater is
very sharp, handle the grater with care to avoid injuries!
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Remove the pusher from the fi lling hole.
• Switch the appliance on.
For starting the appliance, turn the rotary knob to the right to the desired
speed level.
For a better orientation, the speed is classifi ed in 5 levels.
The appliance has a "soft-start", i. e. the appliance starts slowly and increases
the speed evenly to the level you set.
• Pour the food in the fi lling hole and press it down with the pusher. This can be repeated accor-
ding to requirements. Make sure that you do not fi ll too much food in and that you do not
apply too much pressure with the pusher.
The best results will be achieved if you press down the pusher slowly.
Please make sure that the vessel below the spout does not spill and that the pulp container is
not too full.
• Switch the appliance off.
For switching off, turn the rotary knob to the left to the position "0".
Always pull the mains plug after the extracting procedure has been fi nished!

Emptying the pulp container during use

When extracting larger quantities, the pulp container should be emptied regularly to ensure a
trouble-free operation of the appliance.
• Switch the appliance off – pull the mains plug!
• Remove the pulp container (see "How to disassemble your appliance").
• Clean the pulp container.
• Attach the pulp container (see "How to assemble your appliance").
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Switch the appliance on and start working again.

Easing congestions of the grater during use

During use, it might happen that the pulp accumulates below the fi lling hole and congests the
grater. This can happen if you process very hard and fi brous food too quickly and with too much
pressure on the pusher. Then, it is necessary to ease this congestion.
21

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis