Operating The Appliance; Preparing The Appliance For Use - Rommelsbacher ES 800/E Bedienungsanleitung

above the grater. Fold the two locking clamps up and hook the clamps into the intended
bulges of the top cover. Now, push the locking clamps inwards until they engage. You will hear
a clear "click" when the parts engage. Check the fi rm locking of the clamps!
• Attach the pulp container.
Take the pulp container at the recessed grip and position it slightly aslant below the top cover.
Then tilt the container to the back and push it downwards until it engages in the base lock.
• Insert the pusher.
Take the pusher and insert it in the fi lling hole of the top cover. The guiding of the pusher is
made easier by a bar.
• Assemble the juice jug.
Take the foam separator and insert it in front of the two bars and push it downwards as far as
it will go.
Then attach the top cover.

Operating the appliance

The appliance is designed for a max. continuous operation time of 5 minutes when
processing soft food and 2 minutes when processing hard food. If this time has been
reached, the appliance has to cool down for at least 2 minutes.
If this is not observed, the motor might be damaged!
• The juicer is not qualifi ed for chopping and grating coffee beans, nuts, nutmegs, cereals, meat
etc. as well as for puréeing soup.
• Clean the grater and the fi lter regularly so that the micro-mesh fi lter does not congest.
• Empty the pulp container regularly.
• We recommend coating the pulp container with a suitable plastic bag where the pulp is colle-
cted. This will make the cleaning easier.

Preparing the appliance for use

• Assemble the appliance (see "How to assemble your appliance").
• Make sure the juicer has been correctly and properly assembled and that the grater does not
show any damage.
• Please place the provided juice jug or any other suitable vessel below the spout.
20