Prior To Initial Use; How To Demount Your Appliance; How To Assemble Your Appliance - Rommelsbacher ZP 85/E Bedienungsanleitung

Prior to initial use

For a start, please clean the appliance as well as all accessories. For more detailed information
please refer to "Cleaning and maintenance".

How to demount your appliance

• Pull the mains plug!
• Remove the top cover.
• Remove the press cone from the motor shaft.
• Demount the press cone. For this, separate the large press cone from the small press cone.
• Remove the strainer.
• Demount the strainer.
• Detach the juice container from the base unit.

How to assemble your appliance

• Pull the mains plug!
• Place the juice container on the base unit.
• Assemble the strainer.
• Place the strainer on the juice container. Make sure the strainer fits properly. Slight swaying
makes the attaching easier.
• Assemble the press cone. Make sure that the indentations on the larger press cone match
with the retention clips of the smaller one.
• Attach the press cone on the motor shaft. The press cone is connected with the motor shaft by
slightly swaying it.
• Place the top cover.
12
For this, carefully press the 4 retention clips of the strainer take-up
sequentially to the inside and remove the strainer take-up.
Make sure the spout is folded up and that it matches with the indentation
of the base unit.
For this, insert the strainer take-up carefully in the designated opening of
the strainer. Make sure the 4 retention clips engage.