Monacor CD-112RDS/BT Bedienungsanleitung Seite 9

PLAY
PAUSE
1 2 3
STOP
4 5 6 PROG MEM
7 8 9
ASM
DIRECT 10/0 +10/- - ID3 MO/ST
M-DOWN M-UP DOWN UP
FOLDER REV – SKIP – CUE
REPEAT FIND SLEEP FUNC
EJECT MUTE RDS
CD/TUNER
PLAY 1 A-B DISPLAY REMAIN
4.2 Tuner
1) On the remote control, the buttons for
the tuner functions are marked by a white
field with black letters (with the excep-
tion of the number buttons 1 ... 9, 10 / 0) .
The tuner can only be operated with the
remote control when the LED "TUNER"
lights up . If the LED "CD" lights up, press
the button CD / TUNER on the remote
control .
2) All operating options are listed in the fol-
lowing table .
3) During initial operation, first store the sta-
tions that can be received at where you
are located . A maximum of 30 stations
can be stored .
Button
on the remote control 

on the unit
to scan all stations and to store them one after the other:
Keep button pressed for 2 s until the figures start to appear on the frequency
ASM × ×
indication . When the station number
have been stored .
to enter the received frequency:
DIRECT × 1 . Press the button DIRECT .
2 . Enter the frequency in MHz, using the buttons 1...9 and 10 / 0 .
station scanning:
Keep button pressed until the figures start to appear on the frequency indication .
DOWN
× ×
UP
fine tuning:
Briefly press button (repeatedly) .
to store stations:
1 . Set the station (see buttons DIRECT or DOWN / UP) .
Press each of the following buttons within 5 seconds; otherwise, steps 2 – 4 must
MEMORY ×
be repeated .
MEM ×
2 . Press the button MEM(ORY) .
3 . Select the station number (see "Calling up stored stations") .
4 . Press the button MEM(ORY) .
no . buttons
4 4
1... 5,
×
10 5, +5, +5
+5
18 3, +5, +5, +5, +5
22 2, +5, +5, +5, +5, +5
no . buttons
4 4
10 10 / 0
1... 9, 10 / 0,
×
18 8, +10 / - -
+10 / - -
22 2, +10 / - -, +10 / - -
or keep the button +10 / - - pressed for 2 seconds until
display, and then enter the number (two digits) .
M-DOWN / M-UP × previous / next station number
MO / ST × to switch between stereo reception and mono reception
MUTE × to mute and unmute the sound
Additional information for RDS reception
1 press of the button:
st
indication of the programme type or
2 press of the button:
nd
information with regard to title / broadcast programme or
3 press of the button:
rd
RDS × indication of the time (after calling up the station, it may take a few minutes until
the time is available) or
4 press of the button:
th
brief indication of the frequency and the station number, then indication of the
station name (basic setting)
*if the information is not provided
1 . Press button repeatedly until the display indicates the desired length of time
after which the tuner switches off . The tuner will switch off when the set length
of time has elapsed .
2 . To switch the tuner on again:
SLEEP ×
Press button:
again; otherwise, the switchoff function will be activated again .
3 . To deactivate the function before the set length of time has elapsed:
Press button so that the indication
FM Tuner
Function
Storing stations
CH01
Calling up stored stations
PTY NONE
*
CT NONE
Automatic switch-off of the tuner
will appear on the display . Press button once
SLEEP-90 MIN
SLEEP... MIN
appears on the display, all stations
appears on the
CH--
*
*
RT NONE
disappears .
9