oneConcept 10027560 Bedienungsanleitung Seite 18

• Use a connection lead to connect the portable audio player etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this unit and the video output
to a television.
• Press the ON/STAND-BY button to turn the power on.
• Press the SOURCE button on the remote control or SOURCE button repeatedly on main unit
to select AUDIO IN function.
• Play the connected equipment. If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of the connected device. If
volume level is too low, increase the volume of the connected device.
Note: To prevent noise interference, place the unit away from the television.
Setting the clock Time (Remote control only)
• Press the ON/STAND-BY button to turn the power off.
• Press the CLOCK/TIMER button 2 seconds, to adjust the day.
• Press /
24-hour display:
12-hour display
• To set the hour, use
• Repeat, to set the minutes.
In this example, the clock is set for the 24-hour (0:00) display.
• Press the CLOCK/TIMER Button once to turn the TIME function on. The TIME indicator will
appear in the DISPLAY.
• Press the CLOCK/TIMER button 2 seconds, Operation again CLOCK/TIMER button until
"ON" Appears.
• Press /
• Press /
• Set the time to finish as in steps 3 and 4 above.
• To select the timer playback source (TU, CD, USB), press the or button. Press the CLOCK/
TIMER button.
• Adjust the volume using the VOLUME (+ or -) on the main unit or VOL +/- on the remote
control, and then press the CLOCK/TIMER button. Do not turn the volume up too high.
• The indicator lights up and the unit is ready for timer playback.
18
to choose 12h / 24h display format and confirm with CLOCK/TIMER.
(0:00 - 23:59)
(AM 00:00 - PM 11:59)
/ , then press CLOCK/TIMER.
Timer operation (Remote control only)
to select Timer set and press the CLOCK/TIMER button.
, to select "OFF", and press the CLOCK/TIMER button.
Audio IN