Start-Up And Operation; Care And Maintenance - Hama 00124567 Bedienungsanleitung

Warning
• Only connect the product to a socket that has been approved for the device. The socket
must be installed close to the product and easily accessible.
• Do not continue to operate the device if it becomes visibly damaged. (This is mandatory
for all products with 220 V mains connections.)
4. Startup and Operation
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the charger
can supply sufficient power for the device.
• Please refer to the instructions in the operating manual of your terminal device.
Note – 100-240 V mains voltage
• The charger is suitable for a mains voltage of 100-240 V and can be used around the
world. Please note that a country-specific adapter may be necessary.
• You can find an appropriate selection of Hama products at www.hama.com.
• Plug the charger into an approved and easily accessible electrical socket.
• When the power supply is active, the function LED (1) lights up in green. The charger is
now ready for use.
• Connect the terminal device to be charged to the USB port (2) directly or using a suitable
USB cable.
• The function LED (1) lights up in red during charging.
• When charging is complete, the function LED (1) will turn green.
• Disconnect all cable and mains connections after use.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
3