ASROCK ALiveNF5-eSATA2+ Benutzerhandbuch Seite 23

A
A
Connect the SATA Connect the SATA
data cable to the red data cable to the red
SATAII connector eSATAII connector
(SATAII_RED (PORT1)) (eSATAII_BOTTOM)
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED (PORT1); see p.2 No.12) and
the red eSATAII connector (eSATAII_BOTTOM; see p.2 No.37) with a SATA
data cable first, and then connect the orange SATAII connector
(SATAII_ORANGE (PORT3); see p.2 No.10) and the orange eSATAII connec-
tor (eSATAII_TOP; see p.2 No.36) with another SATA data cable. After that,
both the top and the bottom eSATAII ports of the I/O shield are enabled.
Connect the SATA Connect the SATA
data cables to both data cables to both
red SATAII connector red eSATAII connector
(SATAII_RED (PORT1)) (eSATAII_BOTTOM)
and orange SATAII and orange eSATAII
connector (SATAII_ connector (eSATAII_TOP)
ORANGE (PORT3))
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
ASRock ALiveNF5-eSATA2+ Motherboard
2 3 2 3 2 3 2 3 2 3