Hama 00137251 Bedienungsanleitung Seite 2

Operating instruction
G
1. Programming the on and off times
To program the on and off times, push down the
grey tabs that correspond to the desired time.
One tab corresponds to 15 minutes.
If a longer time period is required, more tabs
(increments of 15 minutes) must be pushed down.
Switch-off times: tab position > up
2. Setting the current time
Turn the time dial clockwise until the arrow on the
inner ring of the dial points to the current time.
3. Connecting the timer switch to the mains,
connecting electrical devices to the timer
switch
Insert the timer switch's plug into a 230 V socket
with earth contact. Then insert the mains plug of
the electrical device to be switched into the timer's
socket with earth contact. The main switch of
the device to be controlled must be in the "On"
position.
4. Switching on manually
The on switch on the right side of the timer makes
it possible for the user to switch the device on
permanently. If the switch is put in the "I" position,
then the timer is switched on permanently (the tab
setting "Off" is ignored and the clock continues
operating).
As soon as the switch has been put back in the
"Off" position (), the standard programme
continues.
5. Technical specifications
• 230 V~ / 50 Hz
• 16 A ohmic load; 2 A inductive load
(motorised devices)
• 24-hour timer switch range
(in 15 min. increments)
6. Safety notes
• Never connect the timer switch to an extension
cable or adapter. Only plug it directly into the
socket, otherwise it can overheat.
• Use the timer switch in permanently installed
wall sockets only.
• The timer switch may be operated only in
dry rooms.
• Never use the timer switch outdoors.
• Disconnect from the mains before cleaning
the device.
• Clean the device using only a dry, lint-free cloth.
• No rotating devices may be plugged into the
timer switch.
• Immediately disconnect the device from the
mains if defects occur and do not operate it
any longer.
• Repair work may only be performed by author-
ized specialists.
• Connect the product only to a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
Keep this device, as with all electrical devic-
es, out of the reach of children.
Note on environmental protection:
After the implementation of the
European Directive 2012/19/EU and
2006/66/EU in the national legal
system, the following applies: Electric
and electronic devices as well as
batteries must not be disposed of
with household waste. Consumers are obliged by
law to return electrical and electronic devices as
well as batteries at the end of their service lives to
the public collecting points set up for this purpose
or point of sale. Details to this are defined by the
national law of the respective country. This symbol
on the product, the instruction manual or the
package indicates that a product is subject to these
regulations. By recycling, reusing the materials or
other forms of utilising old devices/batteries, you
are making an important contribution to protecting
our environment.