Range Of Use - JVC HA-W500RF Bedienungsanleitung

CONNECTION
Connection to power supply
Plug polarities
ø3.5 mm plug
To DC 9 V jack
ø2.5 mm plug To receiver CHARGE jack
Note:
Be sure to use the provided exclusive AC adaptor (J47126-001) for connection.
Use of any other AC adaptor may cause a malfunction.

RANGE OF USE

The usable area between the transmitter and the
headphones is within a radius of max 100 m (based
on measurements taken when placed in direct view
in a straight line and no interference situation).
Max: 100 m (Under controlled ambient conditions)
Note:
The usable area may differ depending on building structure, etc.
The range becomes shorter in the following cases:
In places such as inside an apartment
with reinforced concrete walls, or when
the transmitter and headphones are
separated by obstacles such as steel-
reinforced doors.
10
To AC outlet
(AC 230 V, 50 Hz)
Provided exclusive
AC adaptor
(J47126-001)
Be sure to keep this unit
more than 0.5 m away
from concrete walls,
metal furniture, etc.
When items such as
metal furniture are
situated nearby.
POWER REQUIREMENTS OF HEADPHONES
Charging rechargeable Ni-Cd batteries
1
Ø 3,5 mm plug
To DC 9 V jack
1 Set the POWER switch on the headphones to OFF.
The batteries cannot be charged when the switch is set to ON.
2 Connect the DC out (for Receiver Charging) from the AC adaptor to the headphones.
3 Plug the AC adaptor into an AC outlet. The charger starts charging the batteries
automatically.
Charging time
The battery can be fully charged in approx. 24 hours.
During recharge the indicator lights in green, which will start to blink rapidly near
completion. Blinking will gradually slow down or turn off at completion.
When done, unplug the DC plug from the battery.
Battery running time
After charging is complete, you can use them continuously for approx. 20 hours.
Tips for better use
Be sure to charge the batteries within the temperature range of 10˚C ~ 35˚C
(50˚F ~ 95˚F).
Charging batteries that are not completely exhausted will cause efficiency to decline.
Be sure to charge them after they have been completely exhausted.
Provided exclusive
AC adaptor
(J47126-001)
To AC outlet
2
3
ø2.5 mm plug
To receiver CHARGE jack
11