Changing The Display Mode - Intenso PhotoPilot Bedienungsanleitung

Changing the Display Mode

While watching a picture or during the slide show you can change the display mode by repeatedly pressing the [4:3/16:9] button on the remote
control.
4:3: With this selection a picture which is saved in the 16:9 or a larger format is stretched and displayed as full screen picture.

16:9: With this selection a picture which is saved in the 16:9 or a larger format is displayed in its original format with a black bar at the

upper and lower margin.
Please note:
A photo which is saved in the 4:3 format can only be depicted in the format 4:3.

This function is not possible with photos whose resolution is lower than 800X600 pixels.

GB - 13