Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation of loudspeaker in the front door
Step 6
Installation of the tweeters
Carefully remove the tweeter. For this purpose pry open
the 3 fastening points with a slot screwdriver (illustration
9).
Cut 3 parts from the included adhesive ring and place
them on the tweeter as shown in illustration 10. The
entry openings (arrows) must remain free. Remove the
protective paper from the adhesive parts and fit the
tweeter on the pins of the loudspeaker openings
(illustration 11 – arrows) of the mirror triangle cover in
the original position. To be on the safe side glue each of
the 3 pins with normal commercial 2-component glue.
Connect the plugs.
Illu. 10
Step 7
Driver and passenger sides
Installation of woofer
The serial loudspeaker is fastened with 8
rivets (illustration 12). Drill the rivets
carefully out with a 5 mm bit and drill
machine or cordless screwdriver.
Attention! Very carefully remove possible
residue from the door.
Now fasten the new loudspeaker with the
included metal screws. Plug all cables
together. Fasten the cables with the
included material so that they cannot slip
around or rattle.
Step 8
Driver and passenger sides. Remount the door paneling in reverse order.
Attention! Do not forget to reconnect all cable plugs and to correctly replace the door
opening cable.
Illu. 9
Illu. 11
Illu. 12
19
UPGRADE behält sich das Recht vor, die beschriebenen Produkte
ohne jegliche Vorankündigung zu verändern oder zu verbessern.
Alle Rechte sind vorbehalten. Die auch teilweise Vervielfältigung
des vorliegenden Handbuchs ist untersagt.
UPGRADE reserves the rigth to make modifications or
improvements to the products illustrated without notice thereof. All
rights belong to the respective owners. Total or partial reproduction
of this User's Guide is prohibited.
Werbung
