Defects And Malfunctions; Error Codes; Transport And Storage - Tunturi Pure RUN 6.0 Betriebsanleitung

5. If the running belt slips, turn both adjustment bolts 1/4 turn clockwise and repeat
the test.
6. If the belt keeps slipping after several tests, contact the dealer.

Defects and malfunctions

Despite continuous quality control, defects and malfunctions caused by individual
parts can occur in the equipment. In most cases, it will be sufficient to replace the
defective part.
1. If the equipment does not function properly, immediately contact the dealer.
2. Provide the model number and the serial number of the equipment to the dealer.
State the nature of the problem, conditions of use and purchase date.

Error codes

If the display shows an error code (marked with "E" + number), restart the equipment
and check whether the display still shows the error code. If the display still shows the
error code, immediately contact the dealer.

Transport and storage

WARNING
– Before cleaning and maintenance, remove the mains plug from the
wall socket.
– Carry and move the equipment with at least two persons.
– Make sure that there are no other persons or objects under the
equipment.
– When folding the folding the equipment, make sure that you hear
the equipment lock into position to prevent the equipment from
dropping back down.
CAUTION
– Before folding the equipment, make sure that the incline is 0%. If
the incline is not 0%, folding will damage the mechanism.
RUN 6.0
EN
23