Troubleshooting - Inakustik Premium Switch Box 4 in 1 Bedienungsanleitung

Trouble shooting
When there is no picture presented, please:
Make sure the direct connection from the source device to the display device without the HDMI

Switcher is working.
Check all connectors connect well or not.

Check the connecting cable is damaged or not.

Check the power of HDMI Switcher (or reset the switcher)

When there is only picture displayed and without sound:
Check the cable connection to see if it fits properly.

Check your cable to see if it supports video transmission only (DVI) or it is damaged.

HDCP may not match very well at first connection; please reset your HDMI switcher.

Do you connect any output to your video recorder? HDCP will lock up audio part.

When resolution could not show in 1080p.
Make sure your sources and displays are fully supporting 1080p.

Make sure your HDMI cables are capable of transmit 1080P video signal.

When CEC function is not working properly.
Please make sure the blue CEC LED light is on. If not, you can use the remote control to turn on the

CEC function or unplug the power cord to restart the switcher.
Please check if the connected source and display devices support HDMI CEC function.

Please make sure the CEC function of connected source and display devices is enabled.

Please re-initiate the CEC communication. Please follow Step 5 of the connection instruction

on page 3.
If the cable connection was changed, please re-initiate the CEC communication. Please follow Step 5

of the connection instruction on page 3.
Please make sure the CEC function can work correctly when the source device is connected directly

to the display device (TV).
If you operate the CEC function when the DVD (or Blu-ray) player playing mandatory non-skip part

video (ex. Copy right warning), it may cause the CEC not working properly. Please turn off the
player and restart the player.
The CEC functions may not totally work under different brand device. Because each brand may have

their own special control features. It is suggested to choose same brand devices, in order to support
full CEC features of each brand's CEC control.
When 3D content could not be shown on your display.
Please make sure your sources and display are 3D supported devices and also support the same 3D

format.
Please check if the Blu-ray player has been set 3D or AUTO play-mode for video output.

Please make sure the video content is 3D content.

Notice
Manufacturer reserves the right to make changes in the hardware, packaging and any

accompanying documentation without prior written notice.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.
in-akustik Premium Switch incorporates HDMI

PS3 is a trademark of Sony Computer Entertainment Inc.

Dolby is a registered trademark of Dolby Laboratories.

DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.

OPERATION MANUAL
TM technology.
11