Philips GC8600 series Bedienungsanleitung Seite 9

Problem
The iron does
not heat up and
the red DE-
CALC light
flashes.
The steam
generator
produces a
pumping sound.
4239_000_8862_1_DFU-Booklet_A5_v1.indd 9
Possible cause
The appliance reminds you
to perform the descaling
procedure. The light flashes
about after every one month
or after every 10 ironing
sessions.
Water is pumped into the
boiler. This is normal.
Solution
Perform the descaling procedure, following
the instructions in chapter 'IMPORTANT-
cleaning and maintenance', section 'Descaling
the appliance'.
If the pumping sound continues non-stop,
switch off the appliance and unplug it. Contact
an authorised Philips service centre.
ENGLISH
9
11/1/13 1:55 PM