Maintenance And Cleaning - Nova 320200 Bedienungsanleitung

Maintenance
and cleaning
• Never move the steam generator
whilst it is switched on or is still hot.
Switch off the appliance, and wait until
it has cooled down before you move it.
• Never immerse the appliance, the
power cord or the plug in water or
other liquids. If this happens do not
use the appliance any more; dispose
of the appliance.
• Never use corrosive or scouring
cleaning agents.
• Never scrape over the soleplate with
metal objects.
• Never add vinegar or other cleaning
agents to the water reservoir when
ironing. This could damage the
clothing.
• Clean the appliance thoroughly after
use.
• Make sure the appliance is not
plugged into the plug socket when
you are going to clean it.
Maintenance
1 Remove the plug from the wall socket
and allow the appliance to cool down
completely before cleaning it.
2 Always drain all the water from the
reservoir after each use.
3 Wipe limescale and other fouling from
the soleplate using a damp cloth and a
non-abrasive cleaner.
4 Clean the iron's housing with a soft
damp cloth.
Descaling
• The guarantee does not cover
limescale complaints or problems.
To prolong the useful life of your steam
station and prevent limescale descale the
appliance once a month.
1 Rinse the reservoir with clean water.
2 Fill the reservoir with water and vinegar
in a 1:10 mixture or with a special
descaling agent available from
(hardware) stores.
Always verify that the descaling agent
is suitable for use with irons! Follow the
directions given on the package.
3 Install the cap on the water reservoir
and screw it tightly.
4 Put the plug in the wall socket and
switch on the appliance.
5 Set the steam generator switch (No.9)
to 'I' and wait until the indicator light
"steam ready" on the base's control
panel (No.7) will light.
6 Allow the descaling agent to flow
through the appliance by pressing the
steam button for about 2 minutes.
7 Switch off the appliance, remove the
plug from the wall socket and leave the
appliance one night over to have the
descaling detergent do its job.
8 Rinse the reservoir a few times with
clean water and fill the reservoir with
clean water.
9 Install the cap on the water reservoir
and screw it tightly.
10 Put the plug in the wall socket and
switch on the appliance.
11 Set the steam generator switch (No.9)
to 'I' and wait until the indicator light
"steam ready" on the base's control
panel (No.7) will light.
12 Allow the clean water to flow through
the appliance by pressing the steam
button.
Repeat this step until the appliance is
completely filled with clean water.
Steam Station Star Article 320200
11