Important Safeguards - Team DAI 4 Gebrauchsanleitung

Fax +32 2 359 95 50


IMPORTANT SAFEGUARDS

Please read these instructions carefully before using the appliance.

Check that your mains voltage corresponds to that stated on the appliance.

Never leave the appliance unsupervised when in use. Keep out of reach of children or

incompetent persons.
From time to time check the cord for damages. Never use the appliance if cord or

appliance show any signs of damage.
Only use the appliance for domestic purposes and in the way indicated in these

instructions.
Never immerse the appliance in water or any other liquid for any reason whatsoever.

Never place it into the dishwasher.
Never use the appliance near hot surfaces.

Should the cord be damaged, it must be replaced by a competent qualified electrician

All repairs should be made by a competent qualified electrician

Never use the appliance outside and always place it in a dry environment.

Never use accessories which are not recommended by the producer. They could

constitute a danger to the user and risk to damage the appliance.
Never move the appliance by pulling the cord. Make sure the cord cannot get caught in

any way. Do not wind the cord around the appliance and do not bend it.
Never touch the hot parts of the appliance. Always use the handle.

Make sure the cord does not come into contact with the hot parts of the appliance.

Before using the appliance for the first time, remove all labels and remainders from the

sole plate and carefully wipe it dry.
Always let the appliance cool down before cleaning, storing or filling it (model with spray

and/or steam).
To fill the tank it is absolutely necessary to unplug the cord (model with spray and/or

steam)
Competent qualified electrician : after sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
! BEFORE USING IRON, remove any labels from soleplate and wipe any manufacturing residue
from soleplate using a soft cloth.
FILLING THE WATER TANK
Only use demineralised water. If you want to use the steam/dry dial fill the water tank as
follows:
1) Unplug the iron from the outlet to let it cool down and set it horizontally on a
stable level surface.
2) Turn the temperature dial to "MIN" and variable steam/dry dial to the
3) Using a measuring cup, fill the tank with water through the fill opening. Close the
lid of the fill opening.
TEMPERATURE SETTINGS
 You can chose the temperature setting in function with the cloth to iron.
 In order to turn the iron on, please turn the temperature knob clockwise into the required
position (see table below).
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
7
Assembly page 7/20
.
(*)
.
(*)
setting.
TEAM DAI 4 - 050419