Lupus LE 180 Anwenderhandbuch Seite 91

8.14 FTP Settings
1
2
3
4
5
6
7
8 FTP Server：Enter FTP address, to enable file transfer via FTP when a motion
detection event occurs.
9 FTP Port：Enter FTP Port.
10 Username：Enter active user name of FTP server.
11 Password：Enter FTP user password.
12 Remote Folder：Create a remote folder; it should be the same name as your relative
root folder. For example, if you setup an FTP account name user and wants to store a
jpg file to"/ home/ user/ FolderName/", then you need only to enter "/FolderName". If
the file is not found on the FTP server, it is auto created. When the file is found,
enable the authority of the file ($chmod 777 /home/user/FolderName).
13 Passive Mode：Select passive mode.
14 Click [Apply] button to complete the setup.
Note：The folder is created only when a motion-event occurs.
41