Lupus LE 180 Anwenderhandbuch Seite 63

7.2 On the LAN using Discoverer
Please assign an IP address to the IP Camera; either by using a fixed IP or DHCP
assigned IP address. Then enter the relevant IP Address, Subnet Mask and Gateway
value (Default IP 192.168.100.100 and Subnet Mask 255.255.0.0).
After start-up, the system auto track LAN connected IP Camera.
After 4 seconds of search, the system will display the IP Cameras
connected on LAN.
From the box list, select and double click the desired IP Camera, the
system opens an IE browser and auto connects to the selected IP Camera.
To afresh the search for LAN connected IP Camera, click Discover
button for 4 second. The system will display the updated IP Camera list.
Click Close button to terminate the software.
Click Configure button, the system will open up a Configure Network
Device Dialog.
On the LAN using Discoverer
13