Lupus LE 180 Anwenderhandbuch Seite 83

8.9 Motion Detection Window Settings
1
2
1&3
2. Setup motion detection window：Use the mouse to click, hold and drag the
window frame, remember to click [Apply] in order to validate the change.
4. Motion Detection Window Settings：Setup motion detection area parameters.
Window 1, 2, 3：[Enable/ Disable] motion detection setup for window 1-3.
Sensitivity 1, 2, 3：[Very High, High, Normal, Low, or Very Low] sensitivity rate
setup for window 1-3.
5. Click [Apply] button to complete the setup.
33