Operation in a Unicable System
8 Operation in a Unicable System
8.1 Via Unicable
The HDTV receiver AVANIT SHD5 allows for changing the receiving mode to the
unicable standard. This makes it possible - depending on the antenna type - to con-
nect up to eight independent receivers to only one main line.
For this, an own IF channel and a corresponding frequency should be set for each
receiver via the settings menu.
Allocation of channels and frequencies depends on the used LNBs and/or multi-
switches.
The data sheet and the technical documentation of your LNB and/or multi-switch
include an allocation table similar to the following table.
8.2 Allocation of IF channels and frequencies
Receiver
IF channel
Receiver 1
Receiver 2
Receiver 3
Receiver 4
Receiver 5
Receiver 6
Receiver 7
Receiver 8
Enter the frequencies of your receiving system into the last col-
umn of the table so that all relevant information is quickly
available. Rule of thumb: highest frequency shortest cable
path.
132
Exemp. frequency (MHz)
1
1284
2
1400
3
1516
4
1632
5
1748
6
1864
7
1980
8
2096
Frequency (MHz)
AVANIT SHD5