Mounting Of Wall Bracket; Description Of The Device - weinor BiEasy 1M Original Bedienungsanleitung

Mounting of wall bracket

Mounting of wall bracket
• Make sure that the holes are not
drilled into electric cables when
fi tting the wall bracket.
• Before installing the unit in the
required position, check that
the transmitter and receiver are
functioning perfectly.
• Attach the bracket to the wall
with the wall plugs and screws
provided.
The top part of the wall bracket can
be moved.
6 | EN © weinor GmbH & Co. KG

Description of the device

Description of the device
Front side of the device
Rear of the device
7
8
9
© weinor GmbH & Co. KG
1 Operating mode indicator
2 UP button
3 STOP button
4 Status indicator
5 DOWN button
6 Select button
7 Programming button P
Only for experts:
8 DIP switch 1
9 DIP switch 2
EN | 7