Personal Safety - Cocraft LXC HT18 Bedienungsanleitung

e) When using power tools outdoors, use an extension lead that is suitable for
such purpose. The use of an extension lead designed for outdoor use decreases
the risk of electric shocks.
f) If the use of the power tool in a wet environment is unavoidable, a wall
socket equipped with a residual current device (RCD) should be employed.
Use of an RCD significantly reduces the risk of electric shock.

3) Personal safety

a) Pay attention to what you are doing and use common sense when using
power tools. Never use power tools if you are tired or under the influence of
drugs, alcohol or medication. One moment of inattention while using a power
tool may result in serious injury.
b) Wear protective clothing. Always wear safety glasses. Using protective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
decreases the risk of injury.
c) Avoid accidental starts. Make sure that the power switch is set to OFF before
plugging the power tool into a wall socket, fitting the battery or picking up/
carrying the power tool. Carrying a power tool with your finger on the power
switch/trigger or connecting the power tool to a wall socket when the power
switch is set to ON is inviting an accident.
d) Remove all service tools/keys before switching on the power tool.
A service tool left on any of the power tool's rotating parts may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced at all times.
This ensures better control over the power tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose-fitting clothing or jewellery.
Keep hair, clothes and gloves away from moving parts. Loose-fitting clothes,
jewellery or long hair could become caught in moving parts.
g) If equipment for dust extraction or collecting is available make sure it is
connected and used properly. Using of the aforementioned technical aids may
decrease the risk of dust related hazards.
4) Use and maintenance of the power tool
a) Do not force the power tool. Use a power tool suitable for the work you are
about to perform. The proper power tool will perform the task better and safer if
used at the correct feed rate.
b) Never use the power tool if the power switch does not switch the tool on and
off properly. All power tools that cannot be controlled by the power switch are
dangerous and must be repaired.
c) Unplug the lead from the wall socket or remove the battery before
making any adjustments, changing accessories or storing the power tool.
These precautions reduce the risk of the power tool starting unexpectedly.
4