Parts; Before First Use; Inserting/Exchanging Battery; Operation - Ideen Welt AT3470 Bedienungsanleitung

PARTS

1
6

BEFORE FIRST USE

Read through these instructions carefully. Pay close attention to the safety information. Keep these
instructions for future reference and pass them along to future users.

INSERTING/EXCHANGING BATTERY

1. Unscrew the cap. Remove the battery holder of the LED flashlight. (Fig. 1)
2. Insert three new Type 1.5 V R3/LR3/AAA batteries according to the markings into the grooves in
the battery holder. (Fig. 2)
Caution! Always pay attention to the correct polarity (+/-)
3. Slide the battery holder into the flashlight according to the arrows (plus pole).
Then put the cap back on and screw it tightly. (Fig. 3)
Note
If the flashlight's illumination power decreases, the battery set needs to be replaced.
Fig. 1

OPERATION

Switching on and off
Press the On/Off switch to turn the flashlight on and off.
AT3470_A5_150810.indb 8
2 3 4 5
Fig. 2
1. LED lamp head
2. On/Off switch
3. Anti-slip handle
4. Battery holder (not shown)
5. Battery closure cap
6. Handstrap
Fig. 3
8
10/8/15 3:11 PM