Parts; Before First Use; Insert / Replace Batteries; Operation - Ideen Welt kL3599 Bedienungsanleitung

• If the batteries leak, remove them with a cloth and dispose of them accordingly. Prevent
battery acid from coming into contact with skin and eyes. If you do get battery acid in your
eyes, flush them thoroughly with lots of water and consult a physician immediately. If battery
acid comes into contact with your skin, wash the affected area with lots of water and soap.

parts

1
1. Lamp head
2. Grip surface
3. Battery compartment
4. Battery holder with 4 pieces cell type LR44 / AG13
4 x 1.5 V LR44 / AG13 type batteries included in the package.

BEFOrE First UsE

Remove all packaging materials. Clean the torchlight with a dry cloth.

insErt / rEpLacE BattEriEs

• Open the battery compartment lid (5) counter-clockwise.
• Hold the LED light upright directly over a level surface in order to let the battery holder
(4) with the batteries fall downward out of the light. Press the cell type batteries out of the
holder.
• Replace with four new 1.5 V batteries type LR44 / AG13 one after the other in the battery
holder. The positive (+) pole of the batteries should show in direction of the battery
compartment lid.
• Insert the battery holder with the negative (-) pole into the battery compartment (3). Replace
the battery compartment lid and screw it tight.
• If the power of the torchlight should fade, replace the whole battery set.

OpEratiOn

• Hold the torchlight at the grip surface (2) and use the on/off switch (6) to turn the torchlight
on or off.
• The keyring (7) can hold several keys. In darkness the torchlight can be used to lighten the
keyhole.
KL3599_105x146_151020.indd 12
KL3599_A6.indb 7
2 3 4 5 6 7
5. Battery compartment lid
6. On/off switch
7. Keyring
8. Light emission
7
8
20/10/15 5:29 PM
20/10/15 5:28 PM