Mobileye C2-270 Anleitung Seite 8

THe DISTANCe MeTer
The numerical display indicates the distance to the vehicle in front of you in seconds.
VISUAL ALerTS
Mobileye HMW will not issue audio warnings when the system has been muted
WARNING!
•
Never configure Mobileye hMw while driving!
•
Setting the timing of the headway alert to a low value will activate the alert when vehicles are very close.
•
You are always solely responsible for maintaining a safe driving distance from vehicles ahead, regardless of
Mobileye C2-270 warnings or lack of them.
Mobileye Intelligent High-Beam Control (IHC)
HOW DOeS MOBILeYe IHC WOrk?
Mobileye Intelligent High-Beam Control controls a vehicle's driving lights by
automatically switching them from low beam to high beam on dark roads
without nearby traffic.
WHeN IS MOBILeYe IHC FUNCTIONAL?
Mobileye IHC is active at night, on dark roads (with no street lights), without
nearby traffic.
Mobileye IHC is active at speeds greater than 35 km/h (21 mph).
Mobileye IHC is active only if enabled.
MOBILeYe IHC WILL NOT SWITCH TO HIgH BeAMS WHeN:
Another vehicle's tail lights are detected in front of your vehicle at a
distance of less than 400 meters.
There is an oncoming vehicle at a distance of less than 800 meters.
Your vehicle enters a well-lit area, or street lights are detected.
Important notes:
1. Mobileye IHC is available only on certain Mobileye C2 models.
2. Mobileye IHC is available only on selected vehicle models.
3. Mobileye IHC is available only if activated during system installation.
4. Mobileye IHC is available only in certain geographical areas.
NOTICe WArNINg!
IHC active
IHC enabled