Volume Control - Mobileye C2-270 Anleitung

Volume Control

Press the (–) button repeatedly to decrease volume; press the (+) button repeatedly to
increase volume. There are 6 volume levels (0–5). Note: When the volume is set to zero, the
Mobileye LDW and Mobileye HMW sounds are disabled, but Mobileye FCW sound volume
will default to level "3".
Mute
Option 1: Set volume level to "0", either from the EyeWatch Display or from the camera
control button.*
Option 2: Press and hold the (–) button on the EyeWatch Display for 1.5 seconds.
To exit Mute, press (+).
Mute mode is indicated by a flashing green dot in the lower part of the display unit.
Muting will disable the Mobileye HMW and Mobileye LDW audio alerts. Mobileye FCW
cannot be muted.
*Camera button available only in certain Mobileye C2-270 models.
Virtual Bumper Sensitivity (VB)
To change the Virtual Bumper sensitivity, press and hold the (+) button, and then press the
(–) button for 1.5 seconds. A red car icon will start flashing and the numerical display will
light. Press (–) to decrease VB sensitivity, or press (+) to increase it. VB sensitivity is limited to
distances between 1 meter and 2.0 meters. This feature is available only when speed is at "0".