Blaupunkt 5KD 94190 Montage- Und Gebrauchsanweisung Seite 50

Note:
1) For non-steam menus (P01-P40), press „
key in the weight of food manually. Press
2) For the steam menu, at this time, if you need to adjust the default cooking time,
you can press
point, press „ „ or „ " to
3) Press „ „ button to start cooking.
NOTE:
1) After steam auto menu, the water pump will withdraw the water back to water tank,
there will be some noise sound.
2) After steam auto menu, you need to clean the water on cavity and door panel.
3) If the menu need preheating, don't put the food in the oven during preheating. Only
when the temperature is reached, can you put in the food to start cooking.
10. Defrost
1) In standby mode, press"
to the defrost mode. You will see the display „ „ lights and flashes on defrost mode. d01 will
be displayed with default weight setting.
2) Press „ „ to confirm the selected defrost mode and at the same time you can select the
required weight setting by pressing „ „ or „ "
3) Press „ „ button to start cooking.
11. Preheating Function
The prehating function can be activated after you have set the functions:
Convection, Grill fan,, MW-convection, MW-Grill fan.
1) Press „ „ button. When the preheat icon appears in the display.
2) Press „ „ button to start preheating. When the right temperature is reached, you will hear
three beeps. You can stop the preheating by opening the oven door or by pressing the „
button.
Note: The preheating function only works if you have already chosen one of the modes above.
During preheating, the microwave function is switched off.
During preheating, don't put the food in the oven. Only when the temperature is reached, can you
put in the food to start cooking.
, then the default cooking time starts flashing on the display, at this
adjust the Cook time menu.
„button once, you can activitate defrosting function by switching
„ to switch to your preferred menu and
„ „ or „ " to set cooking time.
50
„