Physical Installation - D-Link DAP-2230 Installationsanleitung

Physical Installation

Remove the Mounting Bracket
Slide the DAP-2230 and mounting plate in
opposite directions to release the mounting
bracket.
Connect an Ethernet cable (not included)
from a PoE network device to the Ethernet
port.
2
D-Link DAP-2230 Quick Install Guide
Mounting the AP
Mounting the DAP-2230 to a solid wall
or ceiling
Place the mounting bracket on a wall or
ceiling and mark holes where you will insert
the screws with a marker. Drill holes in the
marked points and insert the plastic wall
anchors.
Use the supplied screws to attach the
mounting plate to the wall.
Reattach the DAP-2230 to the mounting
bracket.