Herunterladen Inhalt Inhalt Diese Seite drucken

LD Systems LDVA8 Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Il triangolo isoscele con punto esclamativo avverte di importanti segnalazioni relative all'uso e alla manutenzione.
ATTENZIONE: ELEVATI LIVELLI SONORI NEI PRODOTTI AUDIO!
Questo dispositivo è destinato a uso professionale. Di conseguenza, se viene destinato ad un uso commerciale, sarà soggetto alle norme e ai
regolamenti dell'Associazione per la prevenzione di infortuni del rispettivo settore professionale. In qualità di produttore, Adam Hall è tenuto per legge
a informare espressamente gli utenti degli eventuali rischi per la salute.
Danni all'udito provocati da un'esposizione prolungata a un livello SPL elevato: dall'utilizzo di questo prodotto si possono generare elevati livelli di
pressione sonora (SPL) che possono provocare danni irreparabili all'udito di artisti, collaboratori e spettatori. Evitare l'esposizione prolungata a livelli
sonori elevati, superiori a 90 dB.
Per evitare possibili danni all'udito, evitare l'ascolto ad un volume elevato per periodi prolungati.
L'esposizione al volume elevato può causare danni all'udito anche se è di breve durata. Mantenere sempre il volume ad un livello
gradevole.
LDVA8
EN
NOTE
The LDVA8 line array loudspeaker is a passive 2-way Mid / High system, which has its own separate mids (MID) and tweeter ways (HIGH). It must al-
ways be operated via 2 separate amplifier channels, because the speaker does not have a built-in passive crossover. Signal distribution and processing
take place in a digital signal processor (e.g. LDDPA260) that is connected before the power amplifiers.
DE
HINWEIS
Der LDVA8 Line Array Lautsprecher ist ein passives 2-Wege Mid / High System, das über einen separaten Mitten- (MID) und Hochton-Weg (HIGH) ver-
fügt. Es muss stets über 2 separate Endstufenkanäle angesteuert werden, da der Lautsprecher nicht über eine eingebaute passive Frequenzweiche
verfügt. Signalverteilung und Signalbearbeitung erfolgen in einem vor die Endstufen geschalteten, digitalen Signal-Prozessor (z.B. LDDPA260).
FR
PRÉCISION
L'enceinte pour line array LDVA8 est une enceinte médium/aigu passive 2 voies, offrant une voie médium (MID) et une voie d'aigus (HIGH) séparées.
Elle doit toujours être alimentée par deux canaux d'amplification distincts, car elle n'intègre pas de filtre répartiteur passif. Le filtrage et le traitement
du signal audio doivent être effectués avant amplification, dans un processeur numérique spécifique (par exemple, un LDDPA260).
ES
NOTA
El altavoz line array LDVA8 es un sistema pasivo de medios/agudos con 2 vías separadas: una para los medios y otra para los agudos. Debe conec-
tarse a dos canales de amplificación independientes, ya que el altavoz no dispone de un crossover pasivo interno. La distribución y procesado de la
señal se realizan por medio de un procesador digital de señales (por ejemplo, el LDDPA260) conectado antes del amplificador.
PL
WSKAZÓWKA
Głośnik LDVA8 Line Array to pasywny system dwudrożny, składający się z głośnika średnio- i wysokotonowego, wyposażony w oddzielne ścieżki
dla tonów średnich (MID) i wysokich (HIGH). Głośnik musi być sterowany za pomocą 2 oddzielnych kanałów końcówki mocy, ponieważ nie posiada
własnej pasywnej zwrotnicy głośnikowej. Rozdzielanie sygnału i jego obróbka następuje w jednym z cyfrowych procesorów sygnału umieszczonych
przed końcówkami mocy (np. LDDPA260).
IT
NOTA
L'altoparlante line array LDVA8 è un sistema passivo a 2 vie separate per i toni medi e alti; deve essere collegato sempre tramite 2 canali dei finali di
potenza separati perché non ha un crossover passivo integrato. La distribuzione e l'elaborazione del segnale hanno luogo in un processore digitale
dei segnali acceso prima dei finali di potenza (ad esempio LDDPA260).
LDVA8 CONNECTIONS / ANSCHLÜSSE LDVA8 / BRANCHEMENTS LDVA8 / CONEXIONES DEL
LDVA8 / PRZYŁĄCZA LDVA8 / CONNESSIONI DELL'LDVA8
EN
Each LDVA8 line array speaker has two NEUTRIK Speakon NL4 speaker connectors (pin +1 and -1 = mid way MID, pin +2 and -2 = tweeter HIGH),
that are connected in parallel, to enable looping-through of the power amplifier signals. Since the impedance of the mids (MID), as well as of the treble
ways (HIGH) is 16 ohms, up to eight VA8 line array loudspeakers of 2 ohms power amplifier channels can be operated in parallel. Controller presets for
the LDDPA260 signal processor and VA8 speaker data in EASE/EASE Focus GLL format for configuration and acoustic simulation of line arrays can be
downloaded free of charge from our website WWW.LD-SYSTEMS.COM.
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ldvaps215g2Ldv218bg2

Inhaltsverzeichnis