Werbung
Verfügbare Sprachen
Verfügbare Sprachen
transmitter is activated. (Only with ESCs having
BEC current measuring. Not for all transmitters)
Limits: Min 0mA - Max 30000mA
o Max. Fet Temperatur - TelMe-Parameter
Threshold for temperature of power MosFets in
∞C, Here the warning on the transmitter is
activated.
Limits: Min 20∞C - Max 90∞C
Default: 90∞C
o Max. BEC Temperatur - TelMe-Parameter
Threshold for BE temperature in ∞C Here the
warning on the transmitter is activated. (Only at
ESCs with BEC)
Limits: Min 20∞C - Max 90∞C
Default: 90∞C
Firmware-Info
The software status is displayed when the ESC is
connected.
6.
Warranty
SOBEK Drives GmbH guarantees this product to be
free
from
factory
workmanship for a period of 24 months from date of
purchase and purchase within the EU. Warranty for
purchases made outside the EU is in line with the
respective legal regulations. This warranty does not
cover: suitability for specific application, components
worn by use, application of reverse or improper
voltage, tampering, misuse or shipping. Our warranty
liability shall be limited to repairing or replacing the
unit to our original specifications. Because we have
no control over the installation, warranty coverage
will not exceed the original cost of the product. All
warranty claims terminate with opening of the
product. To accept guarantee the original bill on
which the product the date of purchase and the
dealer is named must be sent together with the
product.
Also
a
detailed
necessary. Please use the service form for sending
in.
!
Do not forget to indicate your correct address
for sending the item back.
7. Service, Technical Support, Hotline
Tel.:
+49 (0)7457 9435 0
Fax:
+49 (0)7457 9435 90
Email:
info@kontronik.com
Internet:
www.kontronik.com
Latest KONTRONIK product information, FAQ,
!
and telephone reachability can be found up-to-
date on our homepage.
8.
Recycling
Electric components may not be disposed with
domestic
waste.
They should
disposed properly and environmentally
safe after their service life.
National and local disposal and recycle
regulations must be observed followed.
defects
in
material
fault
description
be
12
and
is
Werbung
