PROGDISC in Richtung des Bedieners gekippt statischer Elektrizität auftritt. werden. Analog dazu ist der vorherige Menüpunkt Die PROGDISC darf unter keinen Umständen über das Kippen der Progdisc vom Bediener weg zu geöffnet oder modifiziert werden. erreichen. Die PROGDISC nicht ins offene Feuer werfen.
Ihren KONTRONIK Drehzahlsteller über das Regleranschlusskabel (2) Ob Ihr Drehzahlsteller online update fähig ist, mit der PROGDISC zu verbinden. Sobald der entnehmen Sie bitte der Bedienungsanleitung Drehzahlsteller angeschossen ist, gelangen Sie Ihres Drehzahlstellers. über enter in das nächste Menü. Bei online Navigieren Sie den Markierungsbalken zu der updatefähigen Drehzahlstellern muss nicht bestätigt...
Durch Navigation des Auswahlbalkens auf den gewünschten Menüpunkt und anschließendes enter gelangen Sie in die jeweilige Unteransicht. 6.2.1 Aktuelle Parameter In diesen Unterpunkt werden alle Parameter, die unter der jeweiligen Konfigurationsoption aktiv sind, mit der aktuellen Einstellung angezeigt. Die aktuelle Einstellung wird unteren...
17,5% auf 22,5% erfolgt wie unten dargestellt. Zum Programmieren der Knüppelwege muss ein Ein Stern markiert die derzeit aktive Einstellung. betriebsbereiter Empfänger (Kanal für Motor/Gas) an der PROGDISC angeschlossen sein. Zusätzlich muss der dazugehörige Sender eingeschaltet sein. Auswahl feste Knüppelwege...
Horizontpunktes. Die Werkseinstellung ist 0° , d.h. Drehrichtungsumkehr Auswahlbalken reagiert nicht, wenn Ermöglicht die Umkehr der Motordrehrichtung PROGDISC flach auf einer Ebene gehalten oder ohne die Motorkabel zu tauschen. gelegt wird. Eine Änderung des Neutralpunktes ist Hold dann sinnvoll, wenn beispielsweise äußere...
Ihrem Drehzahlsteller einstellbar sind, entnehmen bitte Bedienungsanlietung Ihres Drehzahlstellers. Verbinden Sie nun über das mitgelieferte USB Ausschalten Kabel die rechte USB Buchse (5) der PROGDISC mit Ihrem PC. Durch mindestens fünf Sekunden Halten des Bestätigungsknopfes wird PROGDSIC Versetzen Sie anschließend die PROGDISC in den ausgeschaltet.
Gewährleistung EG-Konformitätserklärung Die KONTROINK GmbH bietet 24 Monate Ge- Für die KONTRONIK PROGDISC wird hiermit währleistung auf dieses Produkt bei Kauf in der bestätigt, dass sie den EMV - Richtlinien EU. Produktkäufe außerhalb der EU entsprechen 89/336/EWG, 91/263/EWG und 92/31/EWG ent- den jeweiligen gesetzlichen Vorschriften.
Seite 10
Contact Address ........................ 15 ESCs with online updateability ..................15 Updates ......................15 Updating an ESC ........................ 15 Updating the PROGDISC ....................15 Warranty ......................16 Service, Technical Support, Hotline ............... 16 EG conformity declaration ................16 Recycling ......................16...
Navigation Safety Notes The PROGDISC is navigated via canting. To arrive at the next menu item, the PROGDISC has to be While put on, the PROGDISC must not be canted with ist upper end into direction of the user. within...
ESCs without online updateability By navigating the menu-bar to the option of chice If an ESC, which is not online updateable is and subsequent enter you arrive at the next connected to the PROGDISC the user has the submenu. choice between...
Allows switching between auto programming mode (APM) or fixed stick positions. For programming stick positions a ready to use receiver has to be connected to the PROGDISC. Additionally, the corresponding sender has to be switched on. Entering fixed stick positions leads...
I-Part 0° , i.e. the menu bar does not react, if the The integrale part of the curve can be PROGDISC lays or is held on straight plane. strengthened or allayed. Changing the neutral point makes sense, if for example external influences make reading the P-Part display hard.
The screen below is displayed. change and read out all parameters. Connect the right USB port of the PROGDISC (5) The procedure equals the one described in 6.2. via the included USB cable to your PC.
EG conformity declaration Warranty For the PROGDISC we confirm that the electro- KONTRONIK guarantees this product to be free magnetic compatibility directives 89/336/EWG, from factory defects in material and workmanship 91/263/EWG and 92/31/EWG are met. for a period of 24 months from date of purchase and purchase within the EU.
Seite 20
We electrify you KONTRONIK Gesellschaft für Elektronik mbH – Etzwiesenstraße 35/1 – 72108 Rottenburg am Neckar Tel: 07457/9435-0 – Hotline: 0800-Brushless – Fax: 07457/9435-90 – E-Mail: info@kontronik.com...