Totally Wicked Curve VT60 Bedienungsanleitung Seite 9

Lock/Unlock atomizer resistance:
With the Curve VT60 in Ni or Ti Temperature control mode, press the power button
(B) and the up button together for 2 seconds to lock the atomizer resistance at "base
resistance". A padlock icon will appear next to the resistance reading. Repeat the
above to unlock the resistance and a "Ω" symbol will appear next to the resistance
reading. (Note: Please lock the resistance only at room temperature so that the Curve
VT60 can record the correct "base resistance".)
(B)
In the unlocked mode, when you change the atomizer, the screen may display "New
coil up - same down". If the same coil is still fitted, press the down button, and if it is a
new coil press the up button. Please unlock the resistance when fitting a new atomizer/
coil of a different resistance.
(UP) (DOWN)
9