Totally Wicked Curve VT60 Bedienungsanleitung Seite 5

Fitting the battery to the Curve VT60:
Remove the back magnetic cover (G). Install an appropriately specified 18650 mAh
battery ensuring the polarity of the battery matches the polarity of the markings inside
the device. Refit the back cover.
Power on and off:
Press the power button (B) 5 times in quick succession, the OLED Screen will light
to indicate the Curve VT60 is on and ready to use. In the same way, to turn the Curve
VT60 off, press the power button 5 times in quick succession. When the Curve VT60
is on, the screen will turn off after 30 seconds of inactivity, but will seamlessly recover
when the power button is pressed.
5