Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning
General
The Public Display is designed for wall-mounting. As is the case for all DatCom compon-
ents, the unit must be wired in series with the photovoltaic system on the LocalNet.
Public Display
assembly
Fig. 1 Assembling the Public Display
Important! Attach the Public Display to a firm and flat surface using suitable screws and
plugs. As many surfaces require special plugs and screws, the Public Display is not
supplied with plugs and screws.
Warning! Improper use can cause serious injuries to personnel and damage to
equipment. Do not attempt to use the functions until you have read and under-
stood the following documentation:
-
this Operating Manual
-
any operating manuals for system components, especially concerning
safety at work requirements
1
5
6 6
0 m
( 2 5
. 9 8
m
i n c
h )
3
2
1
1
Werbung
Kapitel
Inhaltsverzeichnis
