Setting The Display Values - Fronius IG Public Display Bedienungsanleitung

Setting the The settings for the Public Display are available in the „Fronius IG.access" software. You
display values can select multiple values from the range of values for the system to be displayed in
succession. You can select a display period of between 1 and 60 seconds for each value
to be displayed. You can additionally specify one value as a favorite. This value will be
displayed between every second display value change.
Important! For detailed information on the „Fronius IG.access" software, refer to the
operating manual „Fronius IG DatCom Detail"
The Public Display shows the selected values in a two-line display. Values are output as
follows:
-
-
Important! The time and date display reserves the first line for the date and the second
line for the time display. The display does not allow you to assign a user-configurable
text string in this case.
Line 1: Displays a user-configurable text with a maximum of 8 characters. Use this
string to describe the selected value.
Line 2: Displays the selected value and the appropriate unit. The Public Display will
automatically query the unit.
7