Playback; Playing Back Recordings; Playback Is Paused After Moving The Playback; Adjusting The Playback Volume - Tascam DR-44WL Bedienungsanleitung

Playback

Playing back recordings

While the Home Screen is open and playback is
stopped, press the 7/9 button to start playback.
Pausing
While the Home Screen is open and a track is playing
back, press the 7/9 button to pause playback at
the current position.
Stopping
When you press the 8/HOME button while the
Home Screen is open and a track is playing back,
playback is paused.
If you press the 8/HOME button again, playback
will be stopped at the head of the file.
Fast-rewinding and fast-forwarding
(search)
While the Home Screen is open and a track is
stopped or playing back press and hold the .
or / button to fast-rewind or fast-forward and
search the played-back file.
Moving the playback position
You can move the playback position by turning the
wheel while the Home Screen is open and a track is
stopped or playing back.
Playback is paused after moving
the playback position. Selecting
a file for playback (skipping)
While the Home Screen is open, press the . or
/ button to select the file that you want to play
back.
If you press the . button at the beginning of
a file playback will skip to the beginning of the
previous file.
If you press the / button at the beginning of or
in the middle of a file playback will skip to the next
file.

Adjusting the playback volume

The volume of sound output through the
OUT jack can be adjusted by use of the OUTPUT
LEVEL (+/−) button while the Home Screen is open.

Connecting with a Computer

You can transfer audio files on the SD card in the unit
to a computer and also transfer audio files from a
computer to the unit.
Connecting the unit to a computer by USB
Use the included USB cable to connect the unit
1.
to a computer. If the power is off, turn it on.
On the
2. USB SELECT
and press the ENTER/MARK
STORAGE
button to connect this unit to the computer.
USB connected
display.
When you open Computer in Windows, this
3.
unit shows on the computer screen as an
external drive named "DR-44WL".
Exchanging files with a
computer
Click the "DR-44WL" drive on the computer to show
the "MUSIC" and "UTILITY" folders.
To transfer files to the computer, open the "MUSIC"
folder and drag and drop the desired files where you
want them to go.
To transfer files from the computer, drag and drop
the desired audio files on the computer to the
"MUSIC" folder.
Disconnecting the unit from a
computer
Before disconnecting the USB cable, follow the
proper procedures for the computer to unmount
this unit.
The power turns off after the unit completes its
shutdown process.
See the computer's operation manual for instruc-
tions about how to unmount an external device.
Settings and Information
Display

Turning the built-in speaker off

Set the items
MENU
/LINE
to OFF.

System settings

Use the SYSTEM menu to customize settings for
using the unit. You can also perform operations such
as initializing settings and formatting SD cards.
Select
w
1. MENU
ENTER/MARK button.
Configure necessary settings for each function.
2.
screen, select
will appear on the
w TOOLS w SPEAKER
and press the
SYSTEM
Connecting the unit to a
smartphone via Wi-Fi
CAUTION
This product has been designed to be
compliant with rules and regulations in the
sales area, display as needed has been.
This product is used in the country / region of
the following has been approved.
United States, Canada, Europe (EU Member
States), Australia, New Zealand, Japan
In countries other than the above, you might
have to use the WiFi function is limited.
Before using, please check the laws and
regulations of the country.
You can operate this unit by remote control with a
free dedicated application (DR CONTROL). In addition
to transport control operations such as playback and
stop, you can also adjust the input, transfer recorded
files and more via Wi-Fi.
How to obtain and install the
dedicated application (DR
CONTROL)
Connect your smartphone to the Internet.
1.
If your smartphone is an Android device,
2.
download and install the dedicated application
(DR CONTROL) from Google Play. If it is an iOS
device, download and install from the App
Store.
Connecting the unit to a smart-
phone via Wi-Fi for the first time
You can connect the unit to a smartphone directly
via Wi-Fi. Therefore, you do not need external devices,
such as a router, or a Wi-Fi network environment.
For the connection, you only need the unit and your
smartphone.
While connecting the unit to your smartphone, you
cannot connect the smartphone to an external Wi-Fi
network.
If using and iOS device
Press the Wi-Fi button to make the Wi-Fi
1.
indicator blink.
A pop-up message appears on the display.
You will be making a connection to a new
2.
smartphone, so press the ENTER/MARK button.
"SSID" and "Encryption key" appear on the
3.
display, and then the unit enters the WPS mode
automatically.
NOTE
The WPS mode is the standard for easy
connection between Wi-Fi devices. The unit
employs push buttons for Android devices.
TASCAM DR-44WL
9