Axis M1011-W Installationsanleitung Seite 11

AXIS M10 Series
AXIS IP Utility - single camera/small installation
AXIS IP Utility
automatically
discovers and
displays Axis devices
on your network. You
can also manually set
a static IP address
through this application. AXIS IP Utility is available on the Axis Network
Video Product CD, or it can be downloaded from www.axis.com/techsup
Install the AXIS M10 Series Network Camera on the same network
segment (physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS M10 Series Network Camera is connected to
the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS M10 Series network camera appears in the window,
double-click to open the camera's home page.
4. See page 13 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your
computer is connected to.
2. Select the AXIS M10 Series in the list.
3. Click the button
enter the IP address.
Click the Assign button and follow on-screen instructions. Note
4.
that the camera must be restarted within two minutes for the new
IP address to be set.
Click the Home Page button to access the camera's web pages.
5.
6. See page 13 for instructions on how to set the password.
Assign new IP address to selected device and
Page 11