Adjusting The Wattage In Tc/Tcr Mode - Eleaf SC iKuu i80 Bedienungsanleitung

50
Settings in TCR Mode (M1, M2, M3)
1� Press the Fire button and the Up button simultaneously for a few seconds while the device is switched off to
enter the TCR menu�
2� Press the Fire button to switch between TCR M1, M2, and M3�
3� Press the "Up" or "Down" buttons to change the values corresponding to the coil of-the atomizer head used�
4� Hold down the Fire button or wait 10 seconds to confirm the settings�
TCR Value Ranges for different Coils:
Material
TCR Value Range
Note
1� The TCR values listed in the table are the actual TCR value multiplied by 10
2� The TCR value range is 1 to 1000�

Adjusting the Wattage in TC/TCR Mode

In TC and TCR modes, the output power is between 1 and 80 watts� Press the Fire button quickly 4 times to adjust
the wattage� Use the "Up" or "Down" buttons to set the wattage�
Nickel NiFe
600 – 700 300 – 400
SC iKuu i80 – Selection & Operating of the Modes
Titan
300 – 400
�
5
SS (303, 304, 316, 317)
80 – 200