Install The Attachment-Type Customer Display (Yuno-Vfd) - WEEE YUNO-151 Bedienungsanleitung

4.2 Install the Attachment-type Customer Display (YUNO-VFD)

The Attachment-type Customer Display(YUNO-VFD) can be installed from the rear top
side of the system. Make sure the unit is powered off before starting.
Please follow the below steps to finish the installation :
1. Unscrew the two pcs of screws from the rear top service door and remove it.
2. Connect the Customer Display cable with the connector of the system. Locate this
connection properly.
3. Insert the Customer Display in place and fasten the two pcs of screws to make it
secure.
20