Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. WEEE Anleitungen
  4. Monitore
  5. YUNO-151
  6. Bedienungsanleitung

WEEE YUNO-151 Bedienungsanleitung

Vorschau ausblenden
Inhaltsverzeichnis

Werbung

Quicklinks

Diese Anleitung herunterladen
User Manual
YUNO-151& YUNO-156

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für WEEE YUNO-151

  • Seite 1 User Manual YUNO-151& YUNO-156...

  • Seite 2: Liability Disclaimer

    Copyrights this equipment does cause harmful interference to radio television reception, which © 2014All rights reserved. The information in this determined by turning the equipment off and on, the document is subject to change without prior notice in user is encouraged to try to correct the interference order to improve reliability, design and function and by one or more of the following measures: does not represent a commitment on the part of the...

  • Seite 3: Weee Notice

    Supply, turn off the power switch and remove the power cable plug from the wall socket. The wall socket must The WEEE mark applies only to countries within the be easily accessible and in close proximity to the European Union (EU) and Norway.

  • Seite 4: Inhaltsverzeichnis

    2.1 Front View ........................3 2.2 Rear View ........................4 2.3 Side View ........................5 2.4 Dimension ........................6 For YUNO-151 ....................... 6 For YUNO-156 ....................... 7 2.5 I/O View .......................... 8 3. System Assembly & Disassembly ..............9 3.1 Open the System Cover ....................9 3.2 Replace the Storage Disk Drive .................

  • Seite 5: Item Checklist

    1. Item Checklist 1.1 Standard Items a. System b. Power Adapter (65W) d. RJ50-COMCable 100cm (x2), plus, c. Power Cable RJ50-COMCable 50cm (x2) e. Manual CD...

  • Seite 6: Optional Items

    1.2 Optional Items YUNO supports full range of peripherals as listed below. Model # Description YUNO-VFD RS-232 interface Attachment-type (integrated) Customer Display YUNO-UPS Intelligent Uninterruptible Power Supply Module Wi-Fi Bluetooth Module YUNO-WBM 2.4/5GHz, 802.11ac, a/b/g, n...

  • Seite 7: System View

    2. System View 2.1 Front View Number Description Bezel Free Panel PC L-Stand System Cover Release Button Base Plate...

  • Seite 8: Rear View

    2.2 Rear View Number Description Attachment-type Customer Display (YUNO-VFD) service door System Cover service door for peripherals VESA mount (75mm x 75mm) Rear Side Cable service door L-Stand Cover...

  • Seite 9: Side View

    2.3 Side View Number Description Power Button 1 x USB 2.0 1 x USB 3.0...

  • Seite 10: Dimension

    2.4 Dimension For YUNO-151...

  • Seite 11: For Yuno-156

    For YUNO-156...

  • Seite 12: I/O View

    2.5 I/O View Bottom-up View Right-side View Bottom-up View Number Description DC-IN jack Combo Audio jack (3.5mm 4 conductor) COM1~4 (from right to left) (RJ50 Connector) LAN (RJ45 Connector) 4 x USB 2.0 (Type A) Cash Drawer (RJ12 Connector) mini DP (Display Port) reserved for Wi-Fi /Bluetooth Right-side View Number...

  • Seite 13: System Assembly & Disassembly

    3. System Assembly & Disassembly 3.1 Open the System Cover Open the System Cover by pressing the System Cover Release Button.

  • Seite 14: Replace The Storage Disk Drive

    3.2 Replace the Storage Disk Drive YUNO offers two 2.5" drive bays of height 7 mm each to allow you to equip it with a configuration of one primary HDD or SSD on the upper bay and one secondary SSD on the lower bay.
  • Seite 15 4. Secure the storage disk drive. Once the storage disk drive has been completely inserted, rotate the Releasing Handler to lock it properly. 5. Connect the storage disk drive to the motherboard. *If you are connecting your primary storage disk drive, the SATA cable should be plugged into the first SATA channel, which is labeled as SATA0.
  • Seite 16 6. Connect the power supply to the storage disk drive. HDD1 labeled on the motherboard provides power supply to the primary storage disk drive, while HDD2 is for the secondary storage disk drive. Make sure that all of your connections are secure. 7.

  • Seite 17: Replace The Memory

    3.3 Replace the Memory Make sure the system is powered off before starting. Please follow the below steps to finish the replacement : 1. Remove the System Cover To open the System Cover, please refer to the procedures described in Chapter 3-1 and remove it.
  • Seite 18 5. Close up the System Cover.

  • Seite 19: Install The Power Adapter

    3.4 Install the Power Adapter The system is equipped with a 65W power adapter. Please follow below procedures to get it plugged into the system. 1. To open the System Cover, please refer to the procedures described in Chapter 3-1, and remove it.

  • Seite 20: Install The Wall-Mount

    3.5 Install the Wall-mount YUNO follows VESA Mounting Interface Standard to allow you to mount the elegant bezel-free panel PC to a stand or wall with four M4 screws easily. The horizontal and vertical distance between the tapped holes on YUNO is 75 mm. Make sure the system is powered off before starting.
  • Seite 21 5. Get ready to the mounting process. Close up the System Cover and then mount it to a stand or wall with four M4 screws easily.

  • Seite 22: Peripherals Installation

    4. Peripherals Installation 4.1 Install the Cash Drawer You can install a cash drawer through the cash drawer port. Please verify the pin assignment before installation. Cash Drawer Pin Assignment Signal DOUT bit0 DIN bit0 12V / 19V DOUT bit1 Cash Drawer Controller Register The Cash Drawer Controller use one I/O addresses to control the Cash Drawer.
  • Seite 23 BIT7: Reserved Cash Drawer “DIN bit0” pin input status. BIT6: = 1: the Cash Drawer opened = 0: the Cash Drawer closed or no Cash Drawer BIT5: Reserved BIT4: Reserved Cash Drawer “DOUT bit1” pin output control. BIT3: = 1: Opening the Cash Drawer = 0: Allow close the Cash Drawer Cash Drawer “DOUT bit0”...

  • Seite 24: Install The Attachment-Type Customer Display (Yuno-Vfd)

    4.2 Install the Attachment-type Customer Display (YUNO-VFD) The Attachment-type Customer Display(YUNO-VFD) can be installed from the rear top side of the system. Make sure the unit is powered off before starting. Please follow the below steps to finish the installation : 1.

  • Seite 25: Specification

    5. Specification Model Name YUNO Model Number YUNO-151 YUNO-156 CPU support Intel® Bay Trial-M SoC Processor J1900 (2M Cache, up to 2.42 GHz)) System memory 1 x SO-DIMM DDR3L 1067/1333MHz, Max 8GB LAN controller RTL8111G PCI-E Gigabit LAN Audio controller...
  • Seite 26 Rear Bottom I/O DC-IN jack 1 x radio jack connector for 19V DC input Audio jack 1 x 4-conductor 3.5mm audio jack for MIC-in and Line-out Serial / COM 4 x RJ50 connector with RJ50 to DB9 cable for RS-232 port - COM1/COM2: RS232, wake on ring (S1, S3, S4, S5) support - COM3/COM4: RS232, powered COM with BIOS select none (Default setting)/ +5V (Default) / +12V for DB9 pin9 by BIOS setting.

  • Seite 27: Configuration

    6. Configuration 6.1 X72 Motherboard 6.1.1 Motherboard Layout...

  • Seite 28: Connectors & Functions

    6.1.2 Connectors & Functions Connectors Functions Internal LVDS1 50-pin connector LVDS2 40-pin connector HDD1 SATA power connector HDD2 SATA power connector INT_SP Speaker connector DIMM1 DDR3 SO-DIMM CRT1 VGA connector (internal) LCD Enable Level Select LCD Power Select RJ12 Power Select External Power button DC-IN...

  • Seite 29: Jumper Settings

    6.1.3 Jumper Settings LCD Enable Level Select Function (1-2)(2-3) 1 2 3 1 2 3 +3.3V (Default) LCD Power Select Function (1-2)(2-3) 1 2 3 1 2 3 +3.3V (Default) RJ12 Cash drawer Power Select Function (1-2)(2-3) 1 2 3 +19V (Default) 1 2 3 +12V...

  • Seite 30: Appendix A: Driver Installation

    Appendix A: Driver Installation To download the most recent drivers and utilities, and obtain advice regarding the installation of your equipment, please visit the AURES Technical Support Website: www.aures-support.fr(French) www.aures-support.fr/UK(English) www.aures-support.fr/GE(German)

  • Seite 31: Appendix B: Customer Display Command Settings

    Appendix B: Customer Display Command Settings 1. FEATURES (1) Data can be displayed on 20 columns x 2 lines. (2) Blue-green color and large characters are easy to eye. (3) The commands modes, fonts, baud rate and other parameters are selected by software.

  • Seite 32: General Specifications

    2. GENERAL SPECIFICATIONS Item Description Display method Vacuum fluorescent display Number of character 40 characters ( 20 columns x 2 lines) Character font 5 x 7 dot matrix Display color Blue green Brightness ~ 500 cd/m² 96 alphanumeric Character type 13 kinds of international character set 1 kind of user define character Character size...
  • Seite 33 3. INTERFACE 3.1 RS-232C Specifications Data transmission Serial Synchronization Asynchronous Handshaking DTR / DSR MARK = -3 to –15 V (logic “1”) Signal level SPACE = +3 to +15 V (logic “0”) Baud rates 4800,9600,19200,38400 or 115200 bps None parity, 8 data bits or Parity and bit length Even parity, 7 data bits Stop bits...
  • Seite 34 4. CONNECTOR AND JUMPER 4.1 RS232C connecter (CN6) Connector type: JST/ZH/1.5mm/6P Pin assignment Signal Direction Function Description From display to PC/Host From PC/Host to display From display to PC/Host From PC/Host to display Signal ground Power 5 Vdc 4.2 USB connecter (CN2) Connector type: JST/ZH/1.5mm/4P Pin assignment Signal...
  • Seite 35 5. COMMAND 5.1 CD5220 Standard Mode Command List Command Code (hex) Function Description ESC DC1 1B 11 Overwrite mode ESC DC2 1B 12 Vertical scroll mode ESC DC3 1B 13 Horizontal scroll mode Set the string display mode,write string to upper ESC QA ..CR 1B 51 41 data x m 0D line...
  • Seite 36 Define download characters. ESC & s n m 32 ≦ n ≦ m 255 1B 26 1 n m [a(p1..pa)] [a (P1..pa)]x 1 ≦a ≦ 5 x (m-n+1) (m-n+1) p1..p5 =row1..row5 Deletes download characters. ESC ? n 1B 3F n 32 ≦...
  • Seite 37 *REMARK : *1 The parameter of international fonts set control by command “ESC f n” Parameter “n” International font set “A” U.S.A. “G” Germany “I” Italy “J” Japan “U” U.K. “F” France “S” Spain “N” Norway “W” Sweden “D” Denmark I “E”...
  • Seite 38 5.2 UTC standard mode command list Command Code (hex) Function Description Display Dimming EOT n 04 n n = 20h, 40h, 60h, FFh Back space Horizontal tab Line feed Carriage return Display position Over write display mode Vertical scroll mode Cursor on Cursor off Clear to end of line...
  • Seite 39 5.3 UTC enhanced mode command list Command Code (hex) Function Description Flashing text start Flashing text stop Upper line display ESC u A ..CR 1B 75 41 data x m 0 ≦ m ≦ 20 Bottom line display ESC u B ..CR 1B 75 42 data x m 0D 0 ≦...
  • Seite 40 5.4 AEDEX mode command list Command Code (hex) Function Description Upper line display 1 ..CR 21 23 31 data x m 0D 0 ≦ m ≦ 40 Bottom line display 2 ..CR 21 23 32 data x m 0D 0 ≦ m ≦ 40 Upper line message scroll continuously 4 ..CR 21 23 34 data x m 0D...
  • Seite 41 5.5 PD3000 mode command list Command Code (hex) Function Description Vertical Scroll Mode Normal Display Mode Brightness Control Back Space Horizontal Tab Line Feed Carriage Return Digit Select Cursor On Cursor Off Reset Down Load Font ENQ d1~d45 CR 05 d1~d45 0D Message Scroll Data to Peripheral 21 23 02...
  • Seite 42 5.6 ADM788 mode command list Command Code (hex) Function Description Clear display Carriage return SLE1 Clear up line and move cursor to upper line left most end SLE2 Clear low line and move cursor to lower line left most end Set period to upper line last n position DC0 n 10 n...
  • Seite 43 5.7 DSP-800 mode command list Command Code (hex) Function Description EOT SOH I n ETB 04 01 49 n 17 Select international character set. Move cursor to specified position. EOT SOH P n ETB 04 01 50 n 17 31H ≦ n ≦ 58H Clear display range from position to position and move cursor to...
  • Seite 44 *REMARK : *1 Using commands “EOT SOH S n ETB”, the value (Hex) of parameter. Layer 31h Save data in layer 1 32h Save data in layer 2 33h Save data in layer 3 *2 Using commands “EOT SOH D n m ETB”, the value (Hex) of parameter. WinPOS extended “select mode”...
  • Seite 45 5.8 EPSON Esc / pos command list Command Code (hex) Function Description Move cursor right. Move cursor left. US LF 1F0A Move cursor up. Move cursor down. US CR 1F 0D Move cursor to right-most position. Move cursor to left-most position. Move cursor to home position.
  • Seite 46 Select/cancel download character set. ESC % 1B 25 n n = 0 , Cancel n = 1 , Select Select peripheral device. ESC = n 1B 3D n n bit 0 = 1 select printer n bit 1 = 1 select display US : 1F3A Set starting/ending position of macro definition.

  • Seite 47: Character Set

    6. CHARACTER SET 6.1 International Font 6.1.1 USA, standard character set (20h – 7Eh)
  • Seite 48 6.1.2 Other character sets Country\Hex U.S.A France Germany Denmark I Sweden Italy Spain Japan Norway Denmark II Slavonic Russia...
  • Seite 49 6.2 Code Page 6.2.1 Page 0 (PC437: USA, Standard Europe) (80H – FFH)
  • Seite 50 6.2.2 Page 1 (Katakana) (80H – FFH)
  • Seite 51 6.2.3 Page 2 (PC850: Multilingual) (80H – FFH)
  • Seite 52 6.2.4 Page 3 (PC860: Portuguese) (80H – FFH)
  • Seite 53 6.2.5 Page 4 (PC863: Canadian-French) (80H – FFH)
  • Seite 54 6.2.6 Page 5 (PC865: Nordic) (80H – FFH)
  • Seite 55 6.2.7 Page 6 (Slavonic) (80H – FFH)
  • Seite 56 6.2.8 Page 7 (Russia) (80H – FFH)
  • Seite 57 6.2.9 Page 19 (PC858 Euro) (80H – FFH)
  • Seite 58 6.2.10 Page 16 (WPC1252) (80H – FFH)
  • Seite 59 6.2.11 Page 12 (Greek) (80H – FFH)
  • Seite 60 6.2.12 Page 26 (WPC-1257) (80H – FFH)
  • Seite 61 6.2.13 Page 64 (ISO8859-7) (80H – FFH) 0A 0B 0C 0D 0E 0F...
  • Seite 62 6.2.14 Page 66 (PC857: Turkish) (80H – FFH) 0A 0B 0C 0D 0E 0F...

Diese Anleitung auch für:

Yuno-156

Inhaltsverzeichnis