WEEE YUNO-151 Bedienungsanleitung Seite 23

BIT7: Reserved
Cash Drawer "DIN bit0" pin input status.
BIT6:
= 1: the Cash Drawer opened
= 0: the Cash Drawer closed or no Cash Drawer
BIT5:
Reserved
BIT4:
Reserved
Cash Drawer "DOUT bit1" pin output control.
BIT3:
= 1: Opening the Cash Drawer
= 0: Allow close the Cash Drawer
Cash Drawer "DOUT bit0" pin output control.
BIT2:
= 1: Opening the Cash Drawer
= 0: Allow close the Cash Drawer
BIT1: Reserved
BIT0: Reserved
Note: Please follow the Cash Drawer control signal design to control the Cash
Drawer.
Cash Drawer Control Command Example
Use Debug.EXE program under DOS or Windows98
Command
O 48C 04
O 48C 00
 Set the I/O address 48Ch bit2 =1 for opening Cash Drawer by "DOUTbit0"
pin control.

Set the I/O address 48Ch bit2 = 0 for allow close Cash Drawer.
Command
I 48C

The I/O address 48Ch bit6 =1 mean the Cash Drawer is opened or not exist.

The I/O address 48Ch bit6 =0 mean the Cash Drawer is closed.
Cash Drawer
Opening
Allow to close
Cash Drawer
Check status
19